Overlap White Painted Stone Fireplace Renovation

A beautiful and elegant mantel can take a room from boring to fabulous on its own. Likewise, an outdated or unappealing mantel can create an opposite reaction, leaving a cold and uninteresting space. Converting a mantel doesn’t have to be expensive and can be completed in a matter of days. All you need is a vision and a plan!

For this makeover, took a construction-grade mantel and fireplace and gave it a spectacular facelift in less than four days. The owner knew she wanted to be daring, as she is slowly adding modern touches throughout her home: Kilim-style rugs, brass lamps, saturated sofas, and lots of white. look for inspiring images and come up with a plan to create a dramatic focal point.

I planned to fill in the holes between the existing fireplace frame stone with grout and paint it white, creating a modern white fireplace frame. We would then build a new mantel that was connected directly to the existing mantel that was bigger and more streamlined. The last step was to use parallel boards to wrap the wall over the mantel to the ceiling.

As with any project, plans evolve as you go along. This project was no exception. intended to sand and stain the mantel board a rich color to make it stand out against the white, but when found the rough sawn boards from a local sawmill, knew they didn’t need to be touched. They were faithful as is and added many characters and history to this mantel.

Preparing For Work

Tape the walls with the painter’s tape and attach a plastic carpet protector to keep the carpet sediment and paint’s clean. If you are doing a similar project, also clean the stone and mantel so that it is free of dust and dirt. All prep materials cost about $ 30 in total; a small cost to protect your furniture.

Grout And Paint The Stone

This part of the project is complicated, but it is worth it for the result.

  • According to the instructions Mix the grout on the bag.
  • Once the draft is fully dry, prime the stone with a masonry primer and paint.
  • Pour the grout into the gaps between the stones until the gaps are full and smooth.
  • Wipe the stone with a moist sponge until all excess grout is gone & Fill the grout bag.

Build The Ledge

Building the shelf was the most subjective part of the process. measured the existing shelf and determined how big we wanted the new shelf to be. Cut each piece to fit and nail directly to the existing mantel.

  • Cut rough lumber to size to fit over the bottom, sides, and top of the existing mantel. This will vary from project to project. Use a miter saw (and jigsaw if necessary) to make the cuts.
  • Nail the wood pieces to the existing ledge with a nail gun and finish nails. Start the lower part, follow the side parts, and conclude with the lower part.
  • Lightly sand to remove chips.

Install Shiplap

Installing the lap was the most labor-intensive part of the project, but once the first level of the board is obtained and nailed, the rest of the boards are easily raised.

  • Slice boards to length with a miter saw.
  • Place the first board on the mantel. Level using spacers if necessary. Nail the sideboards to the wall, lining them up and snapping them tightly between the wall and the front boards.
  • Using ⅛-inch tile spacers between the boards, place the next board on top of the first and nail it to the wall.
  • Steps two and three can be repeated before the wall is whole.
  • Nail the board one by three on top of the last board that meets the roof as a cap.
  • Paint the walls.

This is a large two-story living room and I knew going white was a risk, but it was worth it! The mantel is now the main focus and looks beautiful against the white walls and stone. The contrast between the modern white fireplace and the rustic mantel is a perfect way to mix it up. old with the new. The supplies for this project (not including the fun accessories) came to about $ 875. Not bad for a project with this impact!

Be first to comment