How To Maintain Your Water Softening System

Water Softening System

The fact is that hard water contains a high level of calcium as well as magnesium. Hard water results in limescale buildup and interfering with soap’s ability to clean. Due to this, a water softener system is becoming a vital household appliance these days. Most of the water softeners generally last for years with little maintenance. But in spite of all this, regular checks and cleaning of these systems can improve their lifespan.

Probably the reason why you have landed on this page is that you are looking for the steps for maintaining a water softening system. Therefore, in today’s post, we have got you covered with some of the steps that can help you to maintain your water softening system. So, just take notes of what we are going to tell you because this article will actually be very helpful for you in the future.

How you can maintain your water softening system

The following points highlight a few easy ways that you can use to make the water softening systems work more efficiently and last longer. Let’s discover them.

1- Maintaining the Brine Tank of a Salt-Based Water Softener

Nowadays, there are some best water softeners on the market that replaces calcium as well as magnesium ions causing water hardness. This process is known as “ion exchange”. Usually, the hard water passes through a tank of a water softening system. This tank is known as the resin tank that contains resin beads oversaturated with sodium. The ions of hard water attach themselves to such resin beads and then gets released into the water. For the regeneration cycle, a brine tank is used that is filled with salt pellets or salt crystals. This salt dissolves into a brine that is then drawn into the resin tank. After that, the calcium and magnesium are washed out that has accumulated in the tank over time.

To maintain your water softening system, you need to fill salt into the brine tank. Always remember that the more salt you fill, the more likely it is that your water softening system becomes more efficient.

2- Regenerating a How To Maintain Your Water Softening System

The next step is to regenerate a water softener. If you set all the system settings correctly, then a water softener can provide a sufficient amount of softened water. Without any doubt, we can say that water hardness and water demand vary from household to household. For this purpose, you need to find out what individual settings are best for your water softening system and your water by simple testing. Moreover, there are some basic settings that you should make to regenerate a water softener. These include:

  • Setting the regeneration cycle frequency and time
  • Setting the length of the regeneration cycle
  • Setting the salt dose

3- Cleaning the water softener tank

The last step for maintaining the water softening system is to clean the tank. The fact is most of the water softeners can go without cleaning for about 5 to 10 years. Therefore, try to clean your water softener only if your water has turned hard. Moreover, you can also go for the cleaning process if the basic maintenance above does not fix the problem within a couple of days.

To sum up:

If you install your water softening system properly, then it can last for 10 to 15 years with little maintenance only. Moreover, regular check-ups, as well as cleaning, can improve its lifespan. For maintaining water softener, you can also add a pre-filtration system. This system will definitely protect your softener from dirt and sediments that can be found in almost all water supply systems.

This Post Was Submitted By Harshil Barot From Justwebworld.com

Be first to comment